Drying is the next big process we need to do at the end of our harvest, so it's important to know how to create a cannabis drying room that will result in quality weed.
Well, while it might seem like a simple task, there are some important considerations to keep in mind. Below is how to build a cannabis drying room and how to set up the room; the materials you need and the conditions that determine an excellent final product.
To connect!
How to build a cannabis drying room and how should the room be designed?
If harvest time is approaching and you don't have a drying room yet, here we show you how to build a cannabis drying room and how to set it up.
Before proceeding step by step, it is important that you understand some prior considerations for setting up the drying room. Well, the idea is that you get it all necessary materials,before getting fully involved in the design of your dryer.
Currently on the market we can get complete kits for the design of the marijuana drying room, but if your budget is a little limited or you are one of those who prefer to compose their rooms as you wish, you can choose to buy equipment and utensils separately.
The advantage of buying the materials individually is that you can play with your budget and also with the quality of the equipment you are going to buy, because once you have your marijuana drying room set up, you can use it to treat many more plants.
To create a drying room for cannabis you absolutely need:
- Hydrogen peroxide, isopropyl alcohol or vinegar.
- bucket and sponge.
- fans.
- dehumidifier.
- Air filter.
- carbon filter.
- Hygrometer and digital thermometer.
- Ropes, rods or rod wardrobes.
- Heating (in a cold environment) or air conditioning (in a hot environment).
Although with these materials you can safely assemble the drying room; Many buy tents to better monitor environmental conditions. While it's a good option, if you want or can buy it, it's already on your side.
Build the cannabis drying room step by step
Now let's see in detail how to build the drying room for cannabis:
To start setting up the drying room, you need to choose as small a room as possible, where you don't need to do anything else.
The marijuana drying room should be a completely weather insulated roomConditionsand natural light. It must be a fully controlled environment that meets the requirements for successful grass drying. Therefore, you must close the windows of the place or any access to the outside, leaving only the door.
Pour the purchased cleaner (hydrogen peroxide, isopropyl alcohol or vinegar) into the bucket and use the sponge to disinfect the entire room and materials. This ensures that any contaminants (mold, mildew and bacteria) that could affect the weed being dried are removed.
When finished, remove all utensils and cleaning supplies from the drying room.
Once you have everything cleaned up, you can start installing all the appliances and tidying up your utensils. There's no specific way to do this, so feel free to place them however you like.
The only dimensions at this stage are:
- Do not place the trays directly on top of the ropes, poles or hangers where you will be harvesting the cannabis stalks.
- The outlet of the filter channels must be outside the marijuana drying room.
While this cannabis drying room design responds to a single drying method, it's a quick and easy way to build that room that's so important when harvesting your crop. In fact, drying cannabis is considered the other fifty percent (50%) of what it takes to produce a quality weed.
So when setting up your marijuana drying room, don't skimp on costs as this can have a significant impact on the final product.
drying room conditions
Both the equipment and the drying room conditionsare extremely important for properly drying and curing cannabis. Therefore, you need to take care of the following:
- cleaning
Proper dryer cleaning results in high quality marijuana. Well, that will get rid of mold, fungus, bacteria and any other type of contamination.
Without exception, cleaning the room, equipment, utensils and other elements you use must be done before and after the drying process is completed. Since you could run the risk of contaminating both the marijuana you are curing and future crops.
Poor room cleaning can make your marijuana drying room a breeding ground for contaminants that severely damage the process and product. That's why you should always keep an eye on this condition and do a thorough cleaning of the environment.
- Temperature
The temperature of your dryer is another very important condition for drying your grass well. Because if the temperature is too low, the drying process will be much slower; This environment is particularly conducive to the growth of mold and mildew on marijuana.
On the other hand, high temperature speeds up the drying process too much, resulting in the loss of more terpenes and cannabinoids.
Both scenarios should be avoided at all costs because every producer wants their final product to be of high quality. Therefore, it is advised that the marijuana drying room maintain a maximum temperature of 70 degrees Fahrenheit (70º F) for the first three (3) days. Then you need to lower the temperature so that the marijuana does not dry out too much.
Remember that a proper drying cycle should last around fifteen (15) days when the buds are small, while when they are big it should take a little longer.
Another important consideration that can affect the temperature of your marijuana drying room that you should be aware of is outside temperature fluctuations due to the seasons. Therefore, you should use a heater in the winter and an air conditioner in the summer so that the drying process is not affected.
We recommend using a digital thermometer so that you can closely monitor the temperature of your dryer and take appropriate action if there is any deviation.
- moisture
Humidity, like temperature, is a crucial factor in producing good weeds. Therefore, checking the levels is another condition that you should not forget about during the drying process.
To regulate humidity, it is necessary to use a dehumidifier to remove fifty percent (50%) of the humidity in the pot room during the first four (4) days. Then the percentage should be increased until it reaches seventy percent (70%) in the last days of the drying cycle.
To keep an eye on humidity levels, we recommend using a hygrometer to monitor this determining factor.
- lighting
The marijuana drying room should be a dark room. Therefore, it is important to prevent the grass from coming into contact with sunlight or any other light source.
This is because, once the plants are harvested, light energy no longer provides the benefits generated during cultivation and impairs their good conservation. Furthermore, light, whether natural or artificial, is known to transmit heat, which changes the consistency of the resin, breaks down THC and CBD, and speeds up the drying process more than it should.
As such, you should keep the dryer in complete darkness and only use very dim light during process monitoring rounds.
- air circulation
This condition contributes to a more uniform drying, as with the help of the fans it is possible to keep the air circulating inside the dryer, which greatly favors the process and the final product. To ensure the benefits of this condition, simply do not place the fans towards the clotheslines, as you can mistreat the grass.
On the other hand, using charcoal filters and air purifiers will help reduce strong odors in your drying room, as well as increase humidity control.
- Friction when moving buttons
The friction that can occur when moving the knobs can alter the preservation of resin, terpenes and cannabinoids.
Therefore, when handling them, you must be very careful to avoid as much as possible increasing the loss of these elements, which can determine the good quality of marijuana.
Drying well done = quality grass
After all this tour we can draw a well done conclusionsecois synonymous with a quality herb. Therefore, it does not matter that you do not follow a specific pattern when making a dryer, but that you meet the necessary conditions to obtain a high-quality product with the best smell, taste and effect.